<B>Windows 2000 has recommended 64MB of RAM, not 128. Here's a cut from the ACTUAL windows 2000 professional CD-ROM</B><P><I>**********************************************************************<BR> Release Notes for Setup, <BR> Part 1<BR> Microsoft Windows 2000 Professional <BR>**********************************************************************<P> (c) 1999 Microsoft Corporation. All rights reserved.<P>When installing a new operating system, you need to make several<BR>choices. The Windows 2000 Setup wizard and this readme series guide<BR>you through these choices. You also learn how to connect your computer<BR>to a network. <P>======================================================================<BR>Before You Begin<BR>======================================================================<P>When you set up Windows 2000, you have to provide information about<BR>how you want to install the operating system. The procedures in this<BR>readme series help you provide necessary information. To ensure a<BR>successful installation, you should complete the following tasks-which<BR>are described in the sections that follow-before you install <BR>Windows 2000:<P> * Make sure your hardware components meet the minimum requirements.<BR> * Obtain Windows 2000-compatible hardware and software, such as<BR> upgrade packs, new drivers, and so on.<BR> * Obtain network information.<BR> * Back up your current files before upgrading, in case you need to<BR> restore your current operating system.<BR> * Determine whether you want to perform an upgrade or install a new<BR> copy of Windows.<BR> * If you're installing a new copy, identify and plan for any<BR> advanced Setup options you might want.<P>Important: Before you begin, you should also read the file<BR>Read1st.txt, which is on the Windows 2000 Professional CD. This file<BR>contains late-breaking information that was unavailable when this book<BR>and Windows 2000 Help were written, including preinstallation notes<BR>vital to the success of your installation.<P>This readme series describes how to run Setup and install <BR>Windows 2000 on a single computer. Alternative methods for <BR>installing Windows 2000 are detailed in the resources below.<P>For more information about the deployment process and automated<BR>installation tools, see the Windows 2000 Professional Resource Kit. <P>----------------------------------------------------------------------<BR>Meeting Hardware Requirements<BR>----------------------------------------------------------------------<P>Before you install Windows 2000, make sure your computer meets the<BR>following minimum hardware requirements:<P> * 133 MHz Pentium or higher microprocessor (or equivalent).<BR> Windows 2000 Professional supports up to two processors<BR> on a single computer.<BR> * 64 megabytes (MB) of RAM recommended minimum. <BR> 32 MB of RAM is the minimum supported. 4 gigabytes (GB) of <BR> RAM is the maximum.<BR> * A 2 GB hard disk with 650 MB of free space. <BR> If you're installing over a network, more free hard disk <BR> space is required.<BR> * VGA or higher resolution monitor.<BR> * Keyboard.<BR> * Microsoft Mouse or compatible pointing device (optional).<P>For CD-ROM installation:<P> * A CD-ROM or DVD drive.<BR> * High-density 3.5-inch disk drive, unless your CD-ROM drive is<BR> bootable and supports starting the Setup program from a CD.<P>For network installation:<P> * Windows 2000-compatible network adapter card and related cable<BR> (see the Hardware Compatibility List, Hcl.txt, in the<BR> Support folder on the Windows 2000 Professional CD).<BR> * Access to the network share that contains the Setup files.<BR></I><P><BR>There... now quit bickering about how much RAM MS will suggest people use.... they already made their decision a while ago.<P><BR><B>CoM</B>